|
発表論文
1980年代
1. 不破章雄、山本泰然、溶融銅マットの電気伝導度測定、日本鉱業会誌、100、 (1984)
2. 不破章雄、菅原憲次、加藤栄、気体輸送法―質量分析法の開発とその亜鉛蒸気圧測定への応用、日本金属会誌、48 (1984)
3. 中村真一、不破章雄、気体輸送法―質量分析計システムの開発、早稲田大学理工学研究所報告、114、(1986)
4. 中村真一、不破章雄、気体輸送法―質量分析計システムによるGeS, SnSおよびCdSの蒸気圧測定、日本金属学会誌、51、(1987)
5. 不破章雄、別所誠、微小交流4端子法によるFeO-Fe2O3-SiO2系スラグ融体の導電率測定、日本鉱業会誌、104 (1988)
6. 高田雄京、不破章雄、銅陽極凝固組織と不働態化現象に及ぼす不純物元素の影響―Cu-O-5b(As, Sb, Bi)系，Cu-S-5b(As, Sb, Bi)系、日本鉱業会誌、104 (1988)
7. 高田雄京、Rudi Subagja、不破章雄、粗銅の不働態化現象と陽極凝固組織の関連性に関する研究、日本鉱業会誌、104 (1988)
8. Rudi Subagja、不破章雄、硫酸水溶液中における銅フェライトの溶解挙動に関する研究、資源と素材、105 (1989)
9. 不破章雄、多元系平衡状態図の計算機による作成―Si-N-Cl-H系、Si-C-Cl-H系、Al-N-Cl-H系の状態図のSi3N4, SiC, AlNの製造への応用、資源と素材、105 (1989)
10. 沖猛雄、不破章雄、薄膜材料素材製造、資源と素材、105 (1989)
1990年代
11. 高田雄京、不破章雄、純銅の陽極反応におけるケミカルインピーダンス測定、資源と素材、107 （1991）
12. 不破章雄、杉浦正仁、最近の乾式製錬の進歩と展望、資源と素材、108 (1992)
13. 平井和政、不破章雄、金めっき膜に対する素地ニッケル結晶面の影響、表面技術、43 (1992)
14. 杉浦正仁、不破章雄、SiHCl3からのシリコン析出速度、日本金属学会誌、58 (1994)
15. 不破章雄、熱CVDにおける熱力学、相図及び移動速度論的解析、資源処理技術、41 (1994)
16. 金森賢樹、杉浦正仁、不破章雄、1000K−1300KにおけるSiCl2(g)およびSiCl3(g)のGibbsの標準生成自由エネルギー変化、日本金属学会誌、59 (1995)
17. 加藤 慶信、斎藤 永宏、不破 章雄、Si2Cl6から析出させたシリコン薄膜の結晶構造、日本金属学会誌、60 (1996), 744-750
18. 斉藤剛、谷口徹、不破章雄、SiF4-NH3系熱CVD法における気相での反応性、早稲田大学情報科学研究教育センター紀要、21 (1997) 74-76
19. N Saito and A. Fuwa, Prediction of elementary reaction
mechanism for the CVD process in Si2Cl6-H2
system using semi empirical molecular orbital method, J. Japan Inst. Metals
63(3) (1999), pp.319-325.
20. N. Saito, M. Hirota, T. Ishizaki
and A. Fuwa, Prediction of pressure dependent rate constant for the reaction,
SiH4(g)→SiH3(g)+H(g), using RRKM theory aided by
ab-initio MO, J. Japan Inst. Metals 63(4) (1999), pp.520-526.
21. M. Hirota, N. Saito, T. Ishizaki and A. Fuwa, Theoretical
analysis for thermal chemical deposition from tetraethoxysilane using a
semi-empirical molecular orbital method, J. Japan Inst. Metals 63(7)
(1999), pp.931-937.
22. N. Saito and A. Fuwa,
Thermodynamic function derivation of dioxin substances using semi-empirical
molecular orbital theory, Global Symposium on Recycling, Waste Treatment and
Clean Technology (REWAS’99), San Sebastian, Spain, 5th-9th
September (1999), pp.2009-2018.
23. N. Saito and A. Fuwa, Thermodynamic function derivation of
dioxin substances using semi-empirical molecular orbital theory, Global
Symposium on Recycling, Waste Treatment and Clean Technology (REWAS’99),
San Sebastian, Spain, 5th-9th September (1999),
pp.2009-2018.
24. T. Ishizaki, N. Saito and A. Fuwa, The effect of citric acid
and EDTA addition on Cu-In alloy electrochemical deposition, Mater. Trans., JIM 40(9) (1999), pp.867-870.
2000年代
25. N. Saito, T. Ishizaki and A.
Fuwa, Kinetics of SiHCl3 and SiCl4 evolution in
Si(s)-HCl(g) system by ab-initio MO, Mater. Trans., JIM 41(3)
(2000), pp.383-392.
26. T. Ishizaki, N. Saito and A.
Fuwa, Electrodeposition of Cu-In alloy from the solution containing citric
acid, MMIJ 116 (2000), pp.217-221.
27. N. Saito, T. Ishizaki and A.
Fuwa, Thermodynamic investigation of the effect of oxygen and hydrogen chloride
potential upon generation and decomposition behaviors of dioxins, Toxic.
Environ. Chemosphere 74 (2000),
pp.161-179.
28. N. Saito and A. Fuwa, Prediction
for thermodynamic function of dioxins for gas phase using semi-empirical
molecular orbital method with PM3 hamiltonian, Chemosphere 40 (2000),
pp. 131-145.
29. N. Saito, T. Ishizaki and A.
Fuwa, Gas phase equilibria for dibenzo-p-dioxin, dibenzo-p-furane and biphenyl
in the C-H-O system, Toxic. Environ. Chemosphere 75 (2000), pp.165-177.
30. N. Saito, M. Hirota and A. Fuwa,
The roles of metallic compounds on dioxins generation-decomposition behavior
from thermodynamics and quantum chemistry, Second International Conference
on Processing Materials for Properties (PMP II), San Francisco, California,
USA, 5th-8th November (2000), pp.727-732.
31. T. Ishizaki, N. Saito, D. Yata
and A. Fuwa, Behavior of Cu-In-Te electrodeposition from acid solution, Second
International Conference on Processing Materials for Properties (PMP II),
San Francisco, California, USA, 5th-8th November (2000),
pp.281-284.
32. T. Nishimura, T. Ichikawa, N.
Saito and A. Fuwa, Preparation of YSZ thin films by RF plasma-enhanced metal
organic chemical vapor deposition, Second International Conference on
Processing Materials for Properties (PMP II), San Francisco, California,
USA, 5th-8th November (2000), pp.267-270.
33. M. Hirota, J. Kato, N. Saito and
A. Fuwa, Catalytic effect of copper on dibenzo-p-dioxin and polychlorinated
dibenzo-p-dioxin generations using ab initio molecular orbital method, Toxic.
Environ. Chemosphere 81(3) (2001), pp.133-147.
34. M. Hirota, T. Araki and A. Fuwa,
Catalytic roles of copper on chlorination of precursor phenol for dioxins using
ab initio molecular orbital calculation, Mater. Trans., JIM 42(12)
(2001), pp.2537-2542.
35. M. Hirota, S. Asakura and A.
Fuwa, Quantum chemistry analysis on dioxins generation reactions via
chlorination of precursor substances, Proc. Fourth Pacific Rim Int. Conf. on
Advanced Materials and Processing (PRICM4), (The Japan Institute of Metals,
2001), pp.2213-2216.
36. W. Takahama, M. Hirota and A.
Fuwa, Reaction analysis on carbon dioxide reforming over nickel catalyst by
quantum chemistry, Proc. Fourth Pacific Rim Int. Conf. on Advanced Materials
and Processing (PRICM4), (The Japan Institute of Metals, 2001),
pp.2217-2220.
37. M. Hirota and A. Fuwa, The
effect of sulfur dioxide addition on dioxins generation and decomposition
behaviors from thermodynamics view, Resources Processing Society of Japan
49(1) (2002), pp.16-22.
38. M. Hirota, T. Araki, M.
Michihashi and A. Fuwa, The catalytic roles of copper and iron chloride on
polychlorinated dibenzo-p-dioxins generation from ab initio molecular orbital
method, Recycling and Waste Treatment in Mineral and Metal Processing:
Technical and Economic Aspects, Lulea, Sweden, 16th-20th
June (2002), pp.735-741.
39. M. Hirota, S. Asakura, W.
Takahama and A. Fuwa, The effect of sulfur dioxide addition on dioxins
generation and decomposition behaviors by thermodynamic equilibrium
calculation, Recycling and Waste Treatment in Mineral and Metal Processing:
Technical and Economic Aspects, Lulea, Sweden, 16th-20th
June (2002), pp.693-701.
40. M. Hirota and A. Fuwa,
Theoretical study of dioxins formation considering copper catalytic effects
using quantum chemistry calculation, Annual Reports of Casio Science
Promotion Foundation (2002), pp.68-69.
41. M. Hirota, H. Takashita, J. Kato
and A. Fuwa, Elementary reaction path on polychlorinated biphenyls formations
from polychlorinated benzenes in heterogeneous phase using ab initio molecular
orbital calculation, Chemosphere 50 (2002), pp.457-467.
42. K. Matsuzaki, F. Tanno, A. Fuwa, Simulation
of imperial smelting furnace operation using a mathematical model, Yazawa International Symposium: Metallurgical and
Materials Processing: Principles and Technologies; High-Temperature Metal
Production Vol. 2 (2003)
pp. 63-77
45. 丹野文夫，松崎健嗣，不破章雄，ISFシミュレーションモデルの開発と操業解析，資源と素材 vol. 119 (2003) pp. 17-22
46. 丹野文夫，松崎健嗣，不破章雄，ISFシミュレーションモデルによる操業改善，資源と素材 vol. 119 (2003) pp. 23-25
47. S. Asakura, M. Hirota, and A.
Fuwa, Fabrication of microstructured copper on an indium-tin-oxide surface
using a micropattened self-assembled monolayer as a template, Journal of Vacuum
Science & Technology. A 21 (2003) 1152-1156
48. 浅倉秀一，穂積 篤，不破章雄，ポリマー製化学修飾マイクロウエルアレイの作製，表面技術 Vol. 54, No. 9, 2003 pp.622-623
49. T. Ishizaki, D. Yata, and A.
Fuwa, Electrodeposition of a copper-tellurium compound under diffusion-limiting
control, Materials Transactions 44 (2003) pp. 1583-1587
50.
T. Ishizaki, T. Ohtomo, Y. Sakamoto and A. Fuwa, Effect of pH on the
electrodeposition of ZnTe film from a citric acid solution: Mater. Trans., 45
(2004) 277-280
51.
T. Ishizaki, T. Ohtomo and A. Fuwa, Structural, optical
and electrical properties of ZnTe thin films electrochemically deposited from a
citric acid aqueous solution: J. Phys.D: Appl. Physics, 37(2004),
255-260.
52.
T. Ishizaki, T. Ohtomo and A. Fuwa, Electrodeposition of ZnTe films with
high current efficiency from citric acid aqueous solutions at low
overpotential: J. Electrochem. Soc, 151(2004), C161-C167.
53. T. Ishizaki, N. Saito and A. Fuwa,
Electrodeposition of Copper-indium-telluride films from hydrochloric acid
solution: Surf. Coat. 182 (2004) 159-160
54. 鈴木友宏、石崎貴裕、森暁、不破章雄、Ge-Sb-Te系による新規組成の薄膜作製および評価、日本金属学会誌、68 (2004) 90-93
55. 石森康浩，石崎貴裕，大友健志，不破章雄，ニトリロ三酢酸を添加した塩基性アンモニア浴からのBi2Te3電析，日本金属学会誌，68(2004) 406-411
56. N. Shirahata, K. Oda,
S. Asakura, A. Fuwa, Y. Yokogawa, T. Kameyama, and A. Hozumi, Photoinduced
decomposition of alkyl monolayer using 172 nm vacuum ultraviolet light, Journal
of Vacuum Science & Technology A 22 (2004) 1615-1619.
57. A. Hozumi, N. Shirahata,
Y. Nakanishi, S. Asakura, and A. Fuwa, Wettability control of a polymer
substrate through 126 nm vacuum ultraviolet light irradiation, Journal of
Vacuum Science & Technology A 22 (2004) 1309-1314.
58. S. Asakura, A. Hozumi, S. Fukutani, and A. Fuwa, Fabrication of built-in type
copper microstructures onto epoxy resin, Microelectronic Engineering 75 (2004)
375-382.
59.
S. Asakura, A. Hozumi, T. Yamaguchi, and A.
Fuwa, Fabrication of high-density copper microstructures using vacuum
ultraviolet light lithography and hydrofluoric acid etching treatment, Thin
Solid Films 467 (2004) 127-132.
60.
S. Asakura, A. Hozumi and A. Fuwa,
Fabrication of a Cu nanodot array based on electroless plating employing a
diblock copolymer nanotemplate, J. Vac. Sci. Technol. A 23(4), Jul/Aug (2005)
pp.1137-1140
61.
大友健志、石崎貴裕、荻原大輔、川原田洋、不破章雄、クエン酸浴から電析されたZnTe薄膜のホール効果測定による電気的特性の評価、日本金属学会誌 第69巻 第３号(2005) 298-302
62.
S. Asakura, A. Hozumi, T. Yamaguchi
and A. Fuwa, A simple lithographic method employing 172nm vacuum ultraviolet
light to prepare positive- and vegative-tone poly(methyl methacrylate)
patterns, Thin Solid Films 500(2006) 237-240
63.
山口隆彦，浅倉秀一，不破章雄，172nmの真空紫外光照射によるポリメチルメタクリレート表面の化学構造変化の評価，マテリアルライフ学会，17[4] 140-145 (Oct.2005)
64.
Y. Yamashita, A. Fuwa and F. Tanaka,
CHLORIDE CAPACITY IN FeO-Fe2O3-SiO2 MOLTEN SLAG AT 1523K, TMS Sohn
International Symposium ADVANCED PROCESSING OF METALS AND MATERIALS(2006)503-513
65.
青柳裕一、桑野嘉宏、不破章雄、非経験的分子軌道法による五酸化バナジウム触媒効果を考慮したベンゼン環開裂過程に関する計算化学的解析、環境化学、vol.17, No.1, pp37-45, 2007
66.
A. Fuwa, M.Tsumura, M.Watanabe, and
M. Yoshino, TITANIUM METAL VIA MAGNESIUM REDUCTION OF TITANIUM SUB-CHLORIDE
SPECIES, The 16th IKETANI CONFERENCE Electrochemistry and Thermodynamics on
Materials Processing for Sustainable Production: Masuko Symposium (Nov. 2006),
695-714
|
